Doosan DH150W-7 Excavator Main Pump K5V80 Hydraulic Pump 401-00161A 400914-00513

Product Descriptio

Pos.	Part No	Qty	Parts name	Comments
*.	401-00161AKT	[1]	SEAL KIT;BODY+REG.+PTO
-.	401-00161A	[1]	MAIN PUMP
11	718904	[2]	PISTON ASSY
111	136484	[1]	SHAFT;DRIVING(F)
113	137492	[1]	SHAFT;DRIVING(R)
114	137973	[1]	GEAR 1
123	233645	[2]	BEARING;ROLLING
124	235322	[2]	BEARING;NEEDLE
127	113449	[4]	SPACER;BEARING
13	704212-PH	[1]	CYLINDER BLOCK ASSY(R.H)
14	704237-PH	[1]	CYLINDER BLOCK ASSY(L.H)
141	115794	[1]	BLOCK;CYLINDER
141	115794	[1]	BLOCK;CYLINDER
151	138754	[9]	PISTON
152	113451	[9]	SHOE
153	138753	[2]	PLATE;BUSH
156	121436	[2]	BUSH;SPHERICAL
157	113454	[18]	SPRING;CYLINDER
158	113455	[2]	SPACER
211	113424	[2]	PLATE;SHOE
212	113422	[1]	PLATE;SWASH
214	218549	[1]	BUSH;TILTING
251	113425	[2]	SUPPORT
261	136485	[1]	COVER;SEAL(F)
271	136787	[2]	CASING;PUMP
30	717009	[2]	SWASH PLATE ASSY
312	136228	[1]	BLOCK;VALVE
313	120411	[1]	PLATE;VALVE
314	120412	[1]	PLATE;VALVE(L.H.)
401	113386	[8]	BOLT;SOCKET
406	200828	[8]	BOLT;SOCKET
466	108843	[4]	PLUG;VP
468	108844	[2]	PLUG;VP
469	108878	[2]	PLUG;VP PF3/8
490	224308	[18]	PLUG
5	720252	[1]	PTO ASSY
530	717006	[2]	TILTING PIN ASSY
531	195791	[1]	PIN;TILTING
532	136701	[2]	PISTON;SERVO
534	113382	[2]	STOPPER(L)
535	113383	[2]	STOPPER(R)
548	113380	[1]	PIN;FEEDBACK
702	220018	[2]	O-RING 4DG30
710	201675	[1]	O-RING 1BG85
712	204452	[1]	O-RING 1BG95
717	201634	[2]	O-RING 1BG-120
719	201633	[2]	O-RING 1BG-115
724	201765	[16]	O-RING 1BP8
725	201689	[2]	O-RING 1BP11
726	S8000141	[2]	O-RING
728	201710	[3]	O-RING 1BP18
732	220015	[2]	O-RING 4DP16
774	212231	[1]	SEAL;OIL TCV40V
789	208454	[2]	RING;BACK-UP
792	200034	[2]	RING;BACK-UP
808	201557	[4]	NUT M16
824	202604	[2]	RING;SNAP
885	113384	[2]	PIN
886	200678	[4]	PIN;SPRING
901	212033	[2]	BOLT;EYE
953	118892	[2]	SCREW;SET M16X30L
954	113388	[2]	SCREW;ADJUST

Maintainance

Maintaining the hydraulic pump of a Doosan excavator is an important step to ensure its normal operation and extend its service life. Here are some recommended maintenance methods for the hydraulic pump of a Doosan excavator:

Regularly change the hydraulic oil: Hydraulic oil is the key to the normal operation of the hydraulic system. Regularly changing the hydraulic oil can prevent contaminants and impurities from damaging the hydraulic pump. Make sure to choose the hydraulic oil that is suitable for the excavator model and the working environment, and replace it according to the manufacturer's recommendations.
Clean the hydraulic oil tank: Regularly cleaning the hydraulic oil tank can remove impurities and sediments and maintain the cleanliness of the hydraulic oil. Before cleaning the hydraulic oil tank, always turn off the hydraulic system and use appropriate tools and cleaning agents to clean it.
Check the filter: The filter in the hydraulic system is an important component to prevent impurities from entering the hydraulic pump and other hydraulic components. Check the condition of the filter regularly, and replace it in time if it is damaged or blocked.
Filling points and lubriion: The filling points and lubriion points of the hydraulic pump are parts that require regular maintenance. Use the right amount of lubricant and lubrie regularly according to the instructions in the operating manual.
Regularly check the fasteners: The fasteners around the hydraulic pump should be checked regularly to ensure that they are in the correct tightening state. If they are loose or worn, they should be repaired or replaced in time.
Temperature control: Keep the temperature of the hydraulic system within the appropriate range. Too high or too low temperatures may have adverse effects on the hydraulic pump. Ensure the normal operation of the cooling system and avoid overuse of the hydraulic system.
Check for leaks regularly: Check the hydraulic system for leaks regularly. Leaks may cause hydraulic pump performance degradation and hydraulic oil loss. If leaks are found, they should be repaired immediately.
Please note that the above are only general recommendations, and specific maintenance methods may vary depending on the excavator model and manufacturer. It is strongly recommended to refer to the Doosan excavator's operating manual and maintenance guide for accurate maintenance information and recommendations. In addition, if more complex maintenance or repair work is required, it is recommended to seek professional technical support or consultation.

About Xinfeng Machinery (XF) parts:






Advantages


Warehouse Display

Packaging and Delivery

About Xinfeng Machinery (XF) parts:

Xinfeng Machinery Parts Company was established in 1998. It is a professional team composed of high-quality technical personnel integrating production, maintenance, sales, and service. It is committed to providing customers with high-quality and efficient services. It is headquartered in Guangzhou, China.

We have been engaged in the excavator industry for 25 years. We sell original used parts, rebuilt parts,original new parts, and OEM new parts for many types.We can provide many types for you to choose from. We can provide a quality-trusted full range of hydraulic pumps, travel motors, final drives, main control valves, swing motors, and engines for KOMATSU, , HITACHI, JOHN DEERE, VOLVO, CASE JCB, KOBELCO, NEW HOLLAND, SUMITOMO, KATO, BOB, DOOSAN, and HYUNDAI.

We provide a customer satisfaction guarantee on all our products. We have invested in providing only the highest-quality replacement parts to our customers. Develop a more broad business space together based on long-term, friendly, mutually beneficial, and win-win business relations.